LED

Filters
48 ProductsPage 1 of 2
Otronic SMD 1W High Power LED - Cool White
This type of High Power LEDs are often used for spot lighting with a luminous flux. These LEDs are covered with a kind of...
Otronic 10x RGB Color LED 5mm Magic Rainbow Effect (fast fade and flash)
This LED will quickly change color (fade) and then flash from red to green to blue when supplied with 3V to 3.2V. This creates i...
Otronic RGB LED Strip WS2812B | 5m | 5V | 300 LEDS | IP65
RGB LED strip of 5 meters long and 300 WS2812B LEDs and can therefore be controlled separately. To control this LED strip you need a controller...
Otronic 8x8 RGB 64 LED Matrix 5V WS2812b
RGB LED Matrix with 64 WS2812b addressable LEDs. Works on 5V and can be controlled via Arduino, ESP8266 and ESP32. Dimensions Leng...
Otronic 24-bit RGB LEDs WS2812b circle round (Neopixel 5050)
24 WS2812b RGB LEDs in a circle. Operating voltages: 5V Outer diameter: 85mm Inner diameter: 72mm Dimensions Le...
Otronic Laser diode 5v Module red laser 650nm 5mW copper head
Laser diode Module 5 volt and 5mW designed as a module and suitable for breadboard and Arduino....
Otronic LED Matrix 32x8 with MAX7219 Module
This LED matrix consists of 4x MAX7219 LED panels of 64 LEDs (8x8). In total this matrix is 32 by 8 p...
Otronic Infrared Emitter Diode 1.2V 5mm 940nm
IR Emitter 940nm diode Diameter: 5mm Max. range: approx. 7 meters Voltage: 1.2V - 1.3V Dimensions Length: 0.5cm Wide...
Otronic 10x LED Diode Transparent 5mm Warm White 3V
Very high quality warm white LED diode with a color temperature of 2800-3000K. The light output is 14000 - 16000mcd with a viewing angle of 30 degrees...
Otronic 5mm Super Flux Piranha 4pin LED - Red
Great for projects that need an extremely bright light in the wide angle! 5mm Piranha LEDs, also called Super Flux LED, are among the...
Otronic LED with WS2812B Chip on mini PCB
Bright 5050 SMD RGB LED with integrated WS2812b chip. This controllable LED is ideal for Arduino projects. To easily set up a circuit, you can...
Otronic 8-bit RGB LEDs WS2812b on PCB
8 RGB LEDs on a printed circuit board. Fun to experiment with and to master the code for controlling WS2812b LEDs. Business sp...
Otronic Laser diode 5v red laser 650nm 5mW copper head
Laser diode Module 5 volt and 5mW. Without housing or lens....
Otronic LED Matrix Module MAX7219 Red
This board has a 8x8 dot matrix LED display. Multiple modules can be cascaded using header connections....
Otronic 8-bit RGB LEDs WS2812b circle round (Neopixel)
8 WS2812b RGB LEDs in a circle. Operating voltages: 5V Outer diameter: 28mm Inner diameter: 14mm Dimensions Len...
Otronic MAX7219 Dot Matrix LED Display Module Red
convenient four-wire serial interface can connect all common microprocessors. MAX7219 also allows the user to select any of the data codes...
Otronic 16-bit RGB LEDs WS2812b circle round (Neopixel)
16 WS2812b RGB LEDs in a circle. Operating voltages: 5V Outer diameter: 70mm Inner diameter: 54mm Dimensions Le...
Otronic 12-bit RGB LEDs WS2812b circle round (Neopixel)
12 WS2812b RGB LEDs in a circle. Operating voltages: 5V Outer diameter: 50mm Inner diameter: 35mm Dimensions Le...
Otronic Red Laser Pointer 5mW 650nm 12mm MXD1230
A nice robust red laser pointer module (gives one dot) with a diameter of 12mm Power: 5 mW max Voltage: 3.5 V to 5 V Max....
Otronic 100 LEDs assortment 2V various colors
20x Red20x White20x Yellow20x Green20x Blue 2V, 20mA...
Otronic RGB LED Module SMD 3 colors
The pre-soldered pins make this compact RGB LED module ideal for your Arduino, ESP32 or ESP8266 project. This module contains 1 RGB LED in SMD format....
Otronic 10x LED Diode 5mm Blue 3V
Set of 10 LEDS Blue LED diode. The light output is 5000 - 7000mcd with a viewing angle of 30 degrees. Voltage: 3V max. Current: 20mA...
Otronic 10x LED Diode 5mm Green 3V
Set of 10 LEDS Green LED diode. The light output is 4000 - 5000mcd with a viewing angle of 30 degrees. Voltage: 3V max. Current: 20mA...