CC2500 2.4Ghz RF Transceiver Module (OT5862)

Designed based on TI-Chipcon's CC2500 wireless transceiver chip, the 24TRGC3 is a compact, cost-effective remote wireless transceiver module, widely used in smart home, toy aeromodeling and control fields for short-range data transmission. Sensitivity up to -105dbm, maximum transmission rate up to 500Kbps, output power through register configuration range from -30dbm to +1dbm. The module is integrated with all RF related devices and has a built-in PCB antenna, so that excellent RF performance can be obtained without additional antenna configuration.
This module uses standard 8PIN output. RSSI and power saving mode can be effectively set in the application to reduce costs. You can easily directly develop wireless products with stable performance and high reliability, which greatly shortens the development cycle without in-depth understanding of RF circuit design. Manual welding is required due to the different thermal expansion coefficient of the black glue and the binding wire inside.
Applications
Logistics tracking, warehouse patrol, RFID (radio frequency identification); Replace 232, 485 for wireless data communication; Wireless data acquisition and control for industrial instruments and meters; Automatic AMR (water, electricity, gas) meter reading system Building and home control (smart home); Wireless remote control for consumer electronic products; Wireless alarm, security and protection system Wireless sensor network, etc.
Features
The center frequency is 2433MHz, can work in the range of 2400 ~ 2483.5MHz The maximum output power is +1dBm, and the transmission distance in the open air is more than 100m High receiving sensitivity, up to -105dbm (2.4Kbps) Support GFSK/OOK/2-FSK/ASK/MSK modulation mode, programmable controlCommunication rate 1.2~500Kbs, programmable configuration;Separate 64byte data buffer for transmit/receiveSeparate 64byte RX FIFO and TX FIFOBuilt-in CRC check to ensure reliable data transmissionSupports carrier listening function;Digital RSSI output;Low power consumption, receiving current less than 15Ma, emission current less than 25mA;With low power consumption mode, the current consumption is less than 2uA;Switching time of standby and receiving status can be set to reduce power consumption, under WOR function;Built-in temperature sensor;Four-line SPI interface, strong versatility;Power supply: 1.8~3.6V DC

CC2500 datasheet
DimensionsLength: 1.5cmWidth: 1.1cmHeight: 0.15cm