Motor driver module TB6612FNG for Arduino (OT2065-A44)

Features:1. Standby control to save power.2. CW/CCW/short brake/stop motor control modes.3. Built-in thermal shutdown circuit and low voltage detection circuit.Description:The TB6612FNG motor driver can control up to two DC motors with a constant current of 1.2A (3.2A peak). Two input signals (IN1 and IN2) can be used to control the motor in one of four function modes: forward, reverse, short brake and stop. The two motor outputs (A and B) can be controlled separately, the speed of each motor is controlled by a PWM input signal with a frequency of up to 100kHz. The STBY pin must be pulled high to wake up the motor from standby mode. Logic power supply voltage (VCC) can be in the range of 2.7-5.5VDC, while the motor power supply (VM) is limited to a maximum voltage of 15VDC. The output current is nominally up to 1.2A per channel (or up to 3.2A for a short, single pulse).The board comes with all components as shown including the header pins. Specifications:Supply Voltage: VM = 15V max, VCC = 2.7-5.5VOutput Current: Iout = 1.2A (average) / 3.2A (peak)DimensionsLength: 2cmWidth: 2cmHeight: 0.3cm