Nano V3 Arduino Compatible CH340 (OT110-B61)

An Arduino Nano clone. Works just as well but is a lot cheaper. Please note, the headers are supplied separately and you need to solder them yourself. Microcontroller Atmel ATmega328Working voltage (logic level): 5VDCInput voltage (recommended): 7V ~ 9VDCInput Voltage (limit): 6V ~ 12 VDCDigital I/O Pins: 14 (of which 6 provide PWM output)Analog Input Pins: 8DC voltage per I/O Pin: 40mAFlash Memory: 32KB (ATmega328) (of which 2 KB used by bootloader)SRAM: 2KB (ATmega328)EEPROM: 1KB (ATmega328)Clock speed: 16MHzThe Arduino Nano V3 is supplied without a USB cable and not assembled. This Arduino Nano clone works exactly the same as the original Arduino Nano and can be programmed with the Arduino IDE software. This is available for Windows, Mac and Linux.Download Arduino IDENOTE: This Arduino Clone is based on the CH340 USB chip. Sometimes it is necessary to install the driver for this for Windows or Mac. With Linux this is actually rare.First try if it works without installing the driver. If there is a COM port available in the Arduino IDE that you can upload to, then it is already OK and nothing needs to be installed. If necessary, you can download the required driver here:Download CH340 driver for WindowsDownload CH340 driver for MacDownload CH340 driver for LinuxDisclaimer: Downloading and installing the offered drivers is an extra service from us and entirely at your own risk. We cannot guarantee that the offered drivers are up-to-date. Any malfunctions that arise from the use of these drivers are at the risk of the person who installs the drivers.