Electric Lock 5V (OT4872)

This electronic lock can be used in lockers, drawers, small cabinets, etc. The locks are water and moisture resistant and can therefore be used in damp areas.
Connecting is very simple. Simply put 5V on the red and black wire and the lock will open. Due to the spring force in the lock, a door will open a little bit. Ideal for lockers.
The lock can be controlled with an Arduino, ESP32 or ESP8266, for example. Use an external power supply to switch the lock with a relay. The switching current is 1.2A, which cannot be controlled directly from your Arduino.
The blue and yellow wires make contact / are connected when the lock is closed. This way you can monitor with your micro roller whether the lock is open or closed.
Connection diagram and example code >>>
Maximum pressure force on the hook and the mechanism: 50KG
Suitable plugs are JST-SM
Can also be opened manually without power. The lock must then be accessible by hand.
Material: zinc alloy
With feedback signal via the blue and yellow wire
Color: Black
Cable length: 10cm
Voltage 5v 1.2 amp via the red and black wire
Maximum switching time is 2 seconds. This means that the pulse to open the lock should preferably not last longer than 2 seconds.
Keywords: solenoid lock, electronic lock, locker, locker lock
DimensionsLength: 5cmWidth: 1cmHeight: 4cm