Lage verzendkosten vanaf
Art: AA003EAN: 8422554191867
Arduino UNO R3 compatible incl. USB cable and header pins. (OT120-B74)
Show all:
Microcontrollers,
Lage verzendkosten vanaf
Op werkdagen voor 16.30 besteld = dezelfde dag verzonden
30 dagen bedenktijd
1 jaar garantie
Description
Arduino UNO R3 combatbile board including USB cable and 40 header pins. To be used in the standard Arduino IDE software.
This UNO R3 has exactly the same operation as the original Arduino UNO R3 and can be programmed with the Arduino IDE software. This is available for Windows, Mac, and Linux.
Download Arduino IDE
Microcontroller: ATmega328P Operating Voltage: 5VInput Voltage (Recommended): 7-12VInput Voltage (Limits): 6-20VDigital I/O Pins: 14 (6 of which can be used as PWM outputs) Analog Input Pins: 6 DC Power per I/O Pin: 20 mADC Power for 3.3V Pin: 50 mAFlash Memory: 32 KB (ATmega328P) of which 0.5 KB is used by the bootloader SRAM: 2 KB (ATmega328P) EEPROM: 1 KB (ATmega328P) Clock Speed: 16 MHz Length: 68.6 mm Width: 53.4 mm Weight: 25g
Other Features
1 x UART
1 x SPI
1 x TWI
Reset Button
LED indicator on digital pin 13
ICSP Header
14-pin header for expansion
NOTE: This Arduino Clone is based on the CH340 USB chip. Sometimes it is necessary to install the driver for this for Windows or Mac. For Linux this is actually rarely the case.
First try if it works without installing the driver. If there is a COM port available in the Arduino IDE that you can upload to, then everything is fine and nothing needs to be installed.
If necessary, you can download the required driver here:
Download CH340 driver for Windows
Download CH340 driver for Mac
Download CH340 driver for Linux
Disclaimer: Downloading and installing the offered drivers is an additional service from us and entirely at your own risk. We cannot guarantee that the offered drivers are up-to-date. Any malfunctions that arise from the use of these drivers are at the risk of the person who installs the drivers.
DimensionsLength: 6.84cmWidth: 5.31cmHeight: 1cm
Read moreRead lessThis UNO R3 has exactly the same operation as the original Arduino UNO R3 and can be programmed with the Arduino IDE software. This is available for Windows, Mac, and Linux.
Download Arduino IDE
Microcontroller: ATmega328P Operating Voltage: 5VInput Voltage (Recommended): 7-12VInput Voltage (Limits): 6-20VDigital I/O Pins: 14 (6 of which can be used as PWM outputs) Analog Input Pins: 6 DC Power per I/O Pin: 20 mADC Power for 3.3V Pin: 50 mAFlash Memory: 32 KB (ATmega328P) of which 0.5 KB is used by the bootloader SRAM: 2 KB (ATmega328P) EEPROM: 1 KB (ATmega328P) Clock Speed: 16 MHz Length: 68.6 mm Width: 53.4 mm Weight: 25g
Other Features
1 x UART
1 x SPI
1 x TWI
Reset Button
LED indicator on digital pin 13
ICSP Header
14-pin header for expansion
NOTE: This Arduino Clone is based on the CH340 USB chip. Sometimes it is necessary to install the driver for this for Windows or Mac. For Linux this is actually rarely the case.
First try if it works without installing the driver. If there is a COM port available in the Arduino IDE that you can upload to, then everything is fine and nothing needs to be installed.
If necessary, you can download the required driver here:
Download CH340 driver for Windows
Download CH340 driver for Mac
Download CH340 driver for Linux
Disclaimer: Downloading and installing the offered drivers is an additional service from us and entirely at your own risk. We cannot guarantee that the offered drivers are up-to-date. Any malfunctions that arise from the use of these drivers are at the risk of the person who installs the drivers.
DimensionsLength: 6.84cmWidth: 5.31cmHeight: 1cm
Eerder bekeken
Ook interessant voor u: